|
PLEXIS POINT OF SALE SOFTWARE |
RETAIL - RESTAURANT - GROCERY - PIZZA - QSR |
| ||||||||||||||||||||||||||||||||
| Windows Cash Register Software - SQL - ODBC Databases | ||||||||||||||||||||||||||||||||
| Portable Data Terminal Setup (PDT) |
|
Portable Data Terminals: If you have purchased an approved PDT on the supported hardware list then this can be interfaced to the POS system. You can manage inventory using a remote device. Note: Plexis POS does not install the PDT network Driver files by default. Attempting to use a PDT on a network without first installing the drivers will result in an error message. All drivers for approved devices are included with Plexis POS. Percon Falcon PDT Network Installation: The Percon Falcon family of devices require that drivers be installed in order to transfer data to and from the portable to your computer. The drivers are included with Plexis POS. It is important to note that ALL computers that will be using the portable must have the drivers installed locally on the machine. If you are running Plexis POS on a network, installing the drivers only on the server is not sufficient to operate the portable on each Register computer. To install PDT driver files, launch the Plexis POS installer. Un-check all boxes EXCEPT the BDE drivers. The setup program can be run from the server and will install all drivers required to operate the Falcon 31x and Falcon 33x terminals. If running Plexis POS on a network first install the drivers on the server, then repeat this step for each computer the portable will be used on. |
|
|
| Register Your Software | Downloads | Reseller Program | Contact Us |