POS Software - Plexis Point of Sale

PLEXIS POINT OF SALE SOFTWARE
QUALITY POS SOFTWARE SINCE 1987
1-800-883-0814
20 Years and Thousands Sold

RETAIL - RESTAURANT - GROCERY - PIZZA - QSR

LIQUOR - CONVENIENCE - FAST FOOD - COFFEE SHOP

Windows Cash Register Software - SQL - ODBC Databases

POS CUSTOMER (POLE) DISPLAY SETUP

Setting Up a Pole Display:
Pole display installation is set up just like a printer. Choose a Windows Text Only Generic Printer and name it "Pole Display" or any other name you like. Test the Pole display through the Plexis POS interface by choosing from the Main System Menu choose Utilities, Hardware Diagnostics then Pole Display. Press F2 and verify you have had a successful test. Once tested choose Save.

USB Pole Displays:
You must install the USB Drivers from Manufacturer First.
The USB Driver will assign a "Virtual COMM Port". You must remember what port the USB Driver
is using. After verifying the pole display is working properly with the USB driver then install
the Generic Printer Driver as described above, then assign the "Virtual COMM Port" number
previously configured by the USB Driver.

Windows 98 Users:
When you choose a pole display name in Plexis POS make sure that name is formatted properly.
For example, if Windows reports a name such as:Pole Display on LPT2:
Remove the wording "on LPT2:" so it is formatted to say "Pole Display" ONLY.

Very Important:
Your pole display must be AEDEX, Ultimate Technologies or PartnerTech compatible or it may not function properly with Plexis POS. Consult with your hardware vendor for more details on command set emulation.

Note :
Plexis Software Systems does not sell or support computer systems, networks POS Peripherals or any other hardware. We can provide support for our software applications only. If you would like to purchase equipment or hardware for use with Plexis POS click for a list of Supported Hardware List.